Flat A, 5/F, Kam Man Fung Factory Building,
6 Hong Man Street, Chai Wan, Hong Kong

Browse:
  Search:
 

Type: All

Last Modify: 2025/11/07

Shipping, tax, and handling costs is not included in the price.
Model No. Wooden Turntable Plinth for Garrard 401 & SME 3012
Description


Tailor made wooden turntable plinth for Garrard 401 turntable motor and pre cut SME 3012 arm mount hole.

Type: Turntable plinth
Material: Ply wood with walnut venner
Dimension: W600x H120x D495mm

For sell item is wooden turntable plinth only not included Garrard 401 turntable motor and dust cover which shown on sample photos.


Condition8.5 / 10
Retail Price (HKD) 1,800.00
Retail Price (USD)238.00
QtyONE
Status  
Model No. Tailor Made In Japan Corian Mid/Hi Horn Pair
Description


Rare Tailor Made Corian MID/HI horn pair.
They fit for YL Acoustic 55 series MID/HI drivers.

Type: MID/Hi horn
Material: Corian w/ stainless steel horn mount
Horn mouth diameter: 25mm
Frequency cutoff: 1000~7000Hz
Dimensions: 230mm diameter x H192mm
Net weight: 12.6kg (Each)

For sell item are Tailor Made In Japan Corian Horn pair and stainless steel horn mount pair only, not included YL Acoustic M-55 horn driver pair which shown on sample pictures.


Condition8.5 / 10
Retail Price (HKD) 12,800.00
Retail Price (USD)1,695.00
QtyPair
Status  
Model No. Audio Technica AT37E MC Cartridge w/ Box #2
Description


Audio Technica AT37E MC cartridge.
Comes with original packing box, AT-LS13 universal type tonearm headshell, protect guard and tools.
AT37E is similar design of TOP model AT1000 MC cartridge.

Type: Moving coil cartridge
Output: 0.1mV / 1kHz 5cm / sec
Stylus pressure range: 1.3~1.5g (optimum 1.4g)
Frequency response: 10~50,000Hz
Channel separation: 30dB / 1kHz
Compliance: 10x 10-6 cm / dyne
Internal impendance: 3 ohm
Stylus: 0.2 x 0.7 mil Ellipical
Cantilever: RUBY
Net weight: 7.0 gram
Headshell: Universal type
Headshell net weight: 13 gram


Condition8.5 / 10
Retail Price (HKD) 5,800.00
Retail Price (USD)768.00
QtyOne
Status  
Model No. Audio Technica AT37E MC Cartridge w/ Box #1
Description


Audio Technica AT37E MC cartridge.
Comes with original packing box, AT-LS13 universal type tonearm headshell, protect guard and tools.
AT37E is similar design of TOP model AT1000 MC cartridge.

Type: Moving coil cartridge
Output: 0.1mV / 1kHz 5cm / sec
Stylus pressure range: 1.3~1.5g (optimum 1.4g)
Frequency response: 10~50,000Hz
Channel separation: 30dB / 1kHz
Compliance: 10x 10-6 cm / dyne
Internal impendance: 3 ohm
Stylus: 0.2 x 0.7 mil Ellipical
Cantilever: RUBY
Net weight: 7.0 gram
Headshell: Universal type
Headshell net weight: 13 gram


Condition9 / 10
Retail Price (HKD) 6,800.00
Retail Price (USD)901.00
QtyOne
Status 
Model No. Ortofon SPU Synergy G MC Cartridge w/ Box
Description


In excellent like new condition Ortofon SPU Synergy G MC cartridge, come with original packing box and user manuel.

The SPU Synergy G modernizes the classic SPU design with a number of optimizations designed for optimum compatibility and sonic purity.
The SPU Synergy features a wood-based housing and has a revised generator system which allows for a maximum output of 0.5 mV, relaxing the requirement for high gain transformer or active preamplification systems.

Type: intergated headshell moving coil cartridge
Channel balance:at 1 kHz: 1.5 dB
Output voltage at 1 kHz 5cm/sec: 0.5 mV
Channel separation at 1 kHz: 23 dB
Frequency response: 20 Hz ~ 20 kHz 2 dB
Tracking ability at 315 Hz: 60 um
Compliance, dynamic, lateral: 8 um/mN
Stylus: Nude Elliptical
Stylus tip radius: r/R 8/18 µm
Tracking force range: 3.0~4.0 g (30~40 mN)
Tracking force, recommended: 3.5 g (35 mN)
Tracking angle: 20 degree
Internal impedance, DC resistance: 2 ohm
Recommended load impedance: 10~50 ohm
Coil wire material: High Purity Copper (OFC)
Cartridge body material: Ground wood and resin composite
Cartridge colour: Shiny Black
Net weight: 28 gram


ConditionLike New / 10
Retail Price (HKD) 10,800.00
Retail Price (USD)1,430.00
QtyOne
Status  
Model No. Unknown 57 Steps Bal In/Out MONO Attenuator
Description


Unknown 57 steps balance in/out MONO attenuator.
Cannot use adaptor for unbalance.

Type: Balance IN and OUT attenuator
Impendance: 250K ohm
Input / Output: 2+, 3-, 1 Ground


Condition8 / 10
Retail Price (HKD) 6,800.00
Retail Price (USD)901.00
QtyOne
Status  
Model No. Audionix ADN-III MC Cartridge Pre Preamplifier
Description


Audionix ADN-III MC cartridge pre preamplifier.

Audionix was Ortofon's Japan distributor since '60~1985.


Type: Moving coil cartridges pre preamplifier
Input impedance/gain: 68 ohm/26dB
Output impedance: 400£[
Frequency response: 6~500000Hz +0-1dB
S/N ratio: 144dB (input equivalent noise RIAA+IHF-A)
Harmonic distortion: 0.003%
AC voltage: AC-100V 50/60Hz
Dimensions :W7.6x H11.0x D23.3cm
Net weight: 1.82kg


Condition8 / 10
Retail Price (HKD) 4,800.00
Retail Price (USD)636.00
QtyOne
Status  
Model No. Audio Interface CST-80E40 MC Step Up Transformer
Description


Rare poor man's M.A.Cotter -- Audio Interface CST-80E40 MC cartridge step up transformer. Comes with original packing box and user manual.

Type: Moving coil cartridge step up transformer
Impendence: 40 ohms
Output impendence: 5.5k ohms
Gain: 20dB
Frequency response: 20~95,000Hz +0 -1dB
Dimensions: W7.6x H5.3x D12.8cm
Net weight: 585 grams


Condition9 / 10
Retail Price (HKD) 3,800.00
Retail Price (USD)503.00
QtyONE
Status 
Model No. Micro Seiki RW-1500 Plinth Stabilizer
Description


Rare original Micro Seiki RW-1500 plinth stabilizer. Comes with 8x install screws. For use with all 1500 series (RB, RX, Full Choice Player and SX)turntable systems.
Net weight: 8kg


Condition9 / 10
Retail Price (HKD) 5,800.00
Retail Price (USD)768.00
QtyONE SET
Status  
Model No. Orsonic DS-250 Disc Stabilizer #2
Description


Orsonic DS-250 disc stabilizer (disc clamp).

Type: Disc clamp
Net weight: 250grams


Condition9 / 10
Retail Price (HKD) 800.00
Retail Price (USD)106.00
QtyONE
Status 

<  11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 >

Negotiated Sold Consigned Reserved New Used



Goods sold are not returntable. Subject to terms and conditions exchange of goods can be considered.