 |
|
Browse: |
|
|
Search: |
Type: All
|
Last Modify: 2026/01/27
|
Shipping, tax, and handling costs is not included in the price.
|
|
| Model
No. | Ortofon SPU 85 Anniversary MC Cartridge NOS |
Description
|
Very rare and very hard to find NEW OLD STOCK Ortofon SPU 85 Anniversary MC cartridge.
SPU 85th Anniversary
The Ortofon SPU 85th Anniversary was launched in 2003 to celebrate Ortofon 85 year anniversary.
This SPU cartridge was only produced in a limited number of 500 units. An idea was to create an outstanding kind of housing made of Japanese Hida Beech wood, famous for its strength and hardness. For the exclusive surface treatment the 6000 years old Japanese Urushi lacquer method was chosen in order to achieving a hard, resistant, and beautiful multilayer surface in a dark maroon color.
Additionally, in order to influence sound from the motor system, Ortofon has succeeded in developing a new wire concept for the armature windings called “AUCURUM”. The basic material here is a specially developed composite consisting of a very pure copper and gold, creating high conductivity and environmental resistance.
The benefits of wooden housing
The expectations about influence on sound reproduction from this very beautiful anniversary design (yet with all the previous classic elements preserved in the motor system) had to be examined by the Ortofon Listening Panel. SPU 85 prototypes were made to be compared to SPU systems mounted in standard metal housing with the same motor system. The Panel proclaimed: Very charming, open, dynamic, straightforward, and present intermediate tone range between 200 and 1500 Hz typical for the SPU sound. The wooden housing first of all seems to have strong influence especially in the range from say 4000 Hz and up, resulting in a very pleasant integration with intermediate frequency range compared to the metal housing. The musical integrity obviously tends to be improved by the lower Q for resonance in the wooden housing compared to the metal.
SPU 85th Anniversary Technical data
Output voltage: 0.4mV at 1000 Hz, 5cm/sec.
Channel balance: <1.5dB at 1 kHz
Channel separation: >23dB at 1 kHz
Frequency range: 20~30,000 Hz at -3dB
Frequency response: 20~20,000 Hz +2 / -1 dB
Tracking ability: 80um at 315Hz lateral
Compliance: 8um/mN dynamic, lateral
Stylus: Nude ellipticall
Stylus radius: r/R 8/18 µm
Stylus pressure range: 3.0~4.0 gram (30 - 40 mN)
Recommended: 3.5 gram
Tracking angle: 20 degree
Internal impedance: 3.5 ohm DC resistance per channel
Recommended load impedance: 50~100 Ohm
Cartridge body material: Hida Beech wood with Urushi lacquer method
Cartridge colour: Dark maroon
Net weight: 28 gram
|
| Condition | NEW OLD STOCK / 10 |
| Retail
Price (HKD) | 26,800.00 |
| Retail
Price (USD) | 3,550.00 |
| Qty | One |
| Status |   |
|
|
|
|
|
| Model
No. | Ortofon SPU Wood A MC Cartridge NOS |
Description
|
Rare and hard to find NEW OLD STOCK Ortofon SPU Wood A MC cartridge in Ortofon original red jewel box (Early packing version).
SPU Wood A
A perfect combination of Japanese and Danish craftsmanship and technique, the SPU Wood A is beautiful in finish and form, as well as in its sonic expression.
The SPU Wood A unique characteristics includes an outstanding housing made of Japanese Beech wood, famous for its strength and hardness. For the exclusive surface treatment, the 6000-year-old Japanese Urushi lacquer method was chosen in order to achieve a hard, resistant and beautiful multilayer surface in a dark maroon color.
The wooden housing has a strong influence resulting in a very pleasant, open, dynamic, straightforward, and present tone range characteristic for the SPU sound.
dge
Services
Support
Where to buy
About us
Historical product
SPU Wood A
A perfect combination of Japanese and Danish craftsmanship and technique, the SPU Wood A is beautiful in finish and form, as well as in its sonic expression.
The SPU Wood A unique characteristics includes an outstanding housing made of Japanese Beech wood, famous for its strength and hardness. For the exclusive surface treatment, the 6000-year-old Japanese Urushi lacquer method was chosen in order to achieve a hard, resistant and beautiful multilayer surface in a dark maroon color.
The wooden housing has a strong influence resulting in a very pleasant, open, dynamic, straightforward, and present tone range characteristic for the SPU sound.
SPU Wood A technical data
Output voltage: 0.18mV at 1000 Hz, 5cm/sec.
Channel balance: <1.5dB at 1 kHz
Channel separation: 20dB at 1 kHz
Channel separation: 10dB at 15 kHz
Frequency response: 20-25.000 Hz +/-2 dB
Tracking ability: 70um at 315Hz at recommended stylus pressure
Compliance: 10 um/mNdynamic, lateral
Stylus: Spherical
Stylus radius: R 18 µm
Stylus pressure range: 3.0~5.0 gram (30~50 mN)
Recommended: 4.0 gram (40 mN)
Tracking angle: 20 degree
Internal impedance: 2.5 ohm
Recommended load impedance > 10 ohm
Cartridge body material: Japanese Beech wood with Urushi lacquer method
Cartridge color: Dark maroon
Net weight: 29 gram
|
| Condition | NEW OLD STOCK / 10 |
| Retail
Price (HKD) | 28,800.00 |
| Retail
Price (USD) | 3,815.00 |
| Qty | One |
| Status | |
|
|
|
|
|
| Model
No. | Ortofon SPU Meister Silver MK II MC Cartridge NOS |
Description
|
Rare and hard to find Ortofon SPU Meister Silver MK II MC cartridge.
The SPU Meister Silver G MkII has been improved on coil winding material, stylus, and magnet
SPU Meister Silver G MK II
The masterpiece of Mr. Robert Gudmandsen, the SPU Meister Silver was introduced in 1996 as a technological improvement of great importance. Ortofon has succeeded in having the purest silver wire ever produced for the coil winding process.
The SPU Meister Silver G MkII has been improved on coil winding material, stylus, and magnet. The cartridge has been outfitted with high purity multi-conductor 6-nines Silver wire (of a purity of 99.9999 %) for a more open and revealing high-end presentation.
The nude elliptical stylus tip mass has been decreased by a factor of more than 50%, resulting in increased tracking ability and reproduction of microdynamic detail. The generator system has been revised to produce a slightly higher output to ensure compatibility with a wider range of moving coil transformers and active MC preamplifiers.
Specifications
Channel balance: 1dB at 1 kHz
Output voltage: 0.3mV at 1 kHz, 5cm/sec
Channel separation: 20dB at 1 kHz
Frequency response: 20~20,000 Hz 2/-1 dB
Tracking ability: 70um at 315 Hz
Compliance: 8um/mN dynamic, lateral
Stylus: Nude Elliptical
Stylus radius: r/R 8/18 μm
Stylus pressure range: 3.0~5.0 gram (30-50 mN)
Recommended: 4.0 gram (40 mN)
Tracking angle: 20 degree
Internal impedance: 3 ohm DC resistance
Recommended load impedance: 10 ohm
Coil wire material: 99.9999 Silver
Cartridge body material: Ground wood and resin composite
Cartridge colour: Shiny black
Net weight: 28 gram
|
| Condition | NEW OLD STOCK / 10 |
| Retail
Price (HKD) | 15,000.00 |
| Retail
Price (USD) | 1,987.00 |
| Qty | One |
| Status | |
|
|
|
|
|
| Model
No. | Partridge TH-9708L MC SUT |
Description
|
Top Of The Line England audio treasure Partridge TH-9708L MC cartridge step up transformer.
Type: Moving coil cartridge step up transformer
Input impendance: 3 ohm
Output impedance: 47k ohm
Dimensions: W16.5x H12.0x D10.0cm
Net weight: 2.75kg
|
| Condition | 9.5 / 10 |
| Retail
Price (HKD) | 32,800.00 |
| Retail
Price (USD) | 4,344.00 |
| Qty | One |
| Status |  |
|
|
|
|
|
| Model
No. | Fidelity Research XL-1 Type "L" MC SUT |
Description
|
Fidelity Research XF-1 type "L" MC cartridge step up transformer.
Type: Moving coil step up transformer
Input Impedance: 3 ohm or less
Output impendance: 47k-50kohm
Step-up gain: 36dB
Frequency Response: 5~50,000Hz
Net weight: 2.1kg
Dimensions: W15.8×H7.0×D12.0cm
Output cord: 70cm.
The core is a laminated ring structure made of hundreds of concentric layers of a new 0.05mm thick super permalloy alloy.
Left and right channels are completely independent.
Quadruple-layer shielding.
|
| Condition | 8 / 10 |
| Retail
Price (HKD) | 3,800.00 |
| Retail
Price (USD) | 503.00 |
| Qty | One |
| Status | |
|
|
|
|
|
| Model
No. | Mactone XP-3 Tube Phono Amplifier NOS/NIB |
Description
|
Rare NOS/NIB (New Old Stock/New In Box) Mactone XP-3 tube phono amplifier. Comes with original packing and warranty card.
Type: RIAA phono amplifier
Input: 1 (RCA -- MM)
Output: 1 (RCA)
Tube: 12AT7 x3
AC voltage: AC-100V 50/60Hz
|
| Condition | 9.5 / 10 |
| Retail
Price (HKD) | 8,800.00 |
| Retail
Price (USD) | 1,166.00 |
| Qty | ONE |
| Status | |
|
|
|
|
|
| Model
No. | Highphonic HA-EQ1 w/ EQ1-ACS MM/MC Phono Amplifier |
Description
|
Highphonic HA-EQ1 MM/MC phono amplifier with EQ1-ACS separate power supply unit set. Comes with separate DC cord.
This is an EQ amplifier for MC cartridges that uses a low-noise, low-distortion JRC high-speed dual power supply op-amp (NJM4580). It has a built-in step-up transformer dedicated to MC and is compatible with all MC cartridges from 3 ohm to 40 ohm. Of course, MM cartridges can also be used.
HA-EQ1
Input: 0.08mV (3 ohm) 0.15mV (38 ohm) directly connected to transformer
Output: 200mV (50k ohm load)
Frequency response: 20-~0,000Hz
Distortion: 0.005% (THD)
S/N: 80dB or more
Dimensions: W200x H55x D150mm
Net weight: 1.2kg
EQ1-ACS
AC voltage: AC100V
Output: DC +/-12V 50mA (2-power stabilized power supply)
Dimensions: W120x H50x D115mm
|
| Condition | 7 / 10 |
| Retail
Price (HKD) | 3,800.00 |
| Retail
Price (USD) | 503.00 |
| Qty | One set |
| Status | |
|
|
|
|
|
| Model
No. | Chario Academy 2 Speaker System Pair |
Description
|
Chario Academy 2 soeaker system pair.
Made in Italy.
Type: Two ways bass reflex speaker system
Cabinet: Solid national walnut
Tweeter: Scan Speak 29mm soft dome
Woofer: Focal double coil
Frequency: 50~20,000Hz
Input impendance: 8 ohm
Input sensitivity: 83dB
Dimension: H41.5x W25.5x D35.5cm
|
| Condition | 9 / 10 |
| Retail
Price (HKD) | 12,800.00 |
| Retail
Price (USD) | 1,695.00 |
| Qty | Pair |
| Status | |
|
|
|
|
|
| Model
No. | Acoustic Research AR 200003-1 12" Woofer Pair |
Description
|
Acoustic Research AR 200003-1 12" woofer pair.
Can use on Acoustic Research speaker models:
AR-3a Improved
AR-11
AR-58
AR-98LS
AR-9LS
Woofer foam edge had replaced around one year.
|
| Condition | 7 / 10 |
| Retail
Price (HKD) | 2,800.00 |
| Retail
Price (USD) | 371.00 |
| Qty | Pair |
| Status | |
|
|
|
|
|
| Model
No. | Thorens TD-125 MK II TT Outer Platter |
Description
|
Rare for sell separate Thorens TD-125 MK II turntable outer platter.
|
| Condition | 7 / 10 |
| Retail
Price (HKD) | 1,500.00 |
| Retail
Price (USD) | 199.00 |
| Qty | One |
| Status | |
|
|
|
|
|
 |
 |
|
 |
|
|
| Negotiated |
Sold |
Consigned |
Reserved |
New |
Used |
|
| Goods sold are not returntable. Subject to terms and conditions exchange of goods can be considered. |
|
